9
MULTIPLE SEQUENCE COOKING
ENGLISH
AUTO COOK OPERATION R-232/R232F
1st Stage
2nd Stage
Example:
Suppose you want to cook rice for 5 minutes on 100P power and then for 16 minutes on 30P power.
Input the time
(5 min.)
Input the
power 100%
(100P)
Input the time
(16 min.)
Input the
power 30%
(30P)
Start
A sequence of maximum 3 stages, consisting of manual cooking time and mode, can be set.
AUTO COOK automatically works out the correct
cooking mode and cooking time. You can choose from
10 AUTO COOK menus. What you need to know
when using this automatic function:
1. Press the AUTO COOK button once, the display
will appear as shown.
2. The menu can be chosen by pressing the AUTO
COOK button until the desired menu number is
displayed. See pages 10-13 “AUTO COOK charts”
3. The weight or quantity of the food can be input by
rotating the TIMER/KG/PORTION knob until the
desired weight/quantity is displayed.
- Enter the weight of the food only. Do not include
the weight of the container.
- For food weighing more or less than weights/
quantities given in the cooking chart, use manual
programmes. For best results, follow the cooking
charts. See page 21 - 23.
4. To start cooking press +1min/START button.
5. When action is required (e.g. to turn food over), the
oven stops and the audible signals sound,
remaining cooking time and any indicator will flash
on the display. To continue cooking, press the
+1min/START button.
The final temperature will vary according to the initial
food temperature. Check food is piping hot after
cooking. If necessary, you can extend the cooking
time and change the power level.
MICROWAVE
POWER LEVEL button
TIMER knob
TIMER knob
x1
x4
x1
To Next Page
Loading...
Need help?
General
