Sharp R-239 User Manual

SETTING THE CLOCK
133/GB-4
BEFORE OPERATION
ENGLISH
Plug in the oven.
1. The oven display will flash:
2. Touch the STOP button the display will show:
To set the clock, see below.
Using the STOP button
Use the STOP button to:
1. Erase a mistake during programming.
2. Stop the oven temporarily during cooking.
3. Cancel a programme during cooking, touch twice.
x1
Example:
To set the 24 hour clock to 23:35
Choose the 24 hour
clock.
1. Choose the clock function.
(12 hour clock)
2. Set the hours. Rotate the
TIMER/WEIGHT knob until
the correct hour is displayed
(23).
Check the display.
4. Set the minutes. Rotate the
TIMER/WEIGHT knob until
the correct minute is displayed
(35).
5. Press the MICROWAVE POWER
LEVEL button to start the clock.
NOTE:
1. You can rotate the TIMER/WEIGHT knob
clockwise or counter-clockwise.
2. Press the STOP button if you make a mistake
during programming.
3. If the electrical power supply to your microwave
oven is interrupted, the display will intermittently
show after the power is reinstated. If this
occurs during cooking, the programme will be
erased. The time of day will also be erased.
4. When you want to reset the time of day, follow the
above example again.
There are two setting modes: 12 hour clock and 24 hour clock.
1.
To set the 12 hour clock, hold the MICROWAVE POWER
LEVEL button
down for 3 seconds. will appear in the display.
2. To set the 24 hour clock, press the MICROWAVE POWER LEVEL button once
more after Step 1, in the example below will appear in the display.
x1 and hold
for 3 secs.
To set the clock, follow the example below.
3. Press the MICROWAVE
POWER LEVEL button
to change from hours to
minutes.
x1and hold
for 3 secs.
x1
x1
x1
7. R239 English 05.3.16 9:37 AM Page 5 (1,1)

Sharp R-239 Specifications

General

Brand	Sharp
Model	R-239
Category	Microwave Oven
Language	English