GB-19
Make sure the terminal screws are tight and the cable
is held securely by the cable grip where it enters the
plug.
Like most appliances in your home, your oven must
be connected to a single phase 230-240V, 50Hz
alternating current supply.
If you do not make the proper electrical connections
you might damage the oven or injure yourself.
Neither SHARP nor the supplier will be liable if this
happens.
WARNING: THIS APPLIANCE MUST BE EARTHED
If you have any doubts about your electrical
supply ask a quali ed electrician.
DEFROSTING ADVICE TO REPLACE THE MAINS PLUG
The wires in the mains cable are colour coded as
shown:
Green and yellow stripes = EARTH
Blue = NEUTRAL
Brown = LIVE
As the colours in the mains lead of your oven may not
correspond with the coloured marking identifying
the terminals in your plug, connect the wires as
described:
•
The green and yellow wire to the plug terminal
marked E or
or coloured green or coloured
green and yellow.
•
The blue wire to the plug terminal marked N or
coloured black or coloured blue.
•
The brown wire to the plug terminal marked L or
coloured red or coloured brown.
• For general information and assistance with oven
queries, please contact our
Customer Information Centre:
U.K.: 0845 888 8112 (o ce hours)
Ireland: 01 676 0648 (o ce hours)
Website: www.sharp.co.uk/customersupport
• Replacement accessories may be obtained from our
main parts distributor: Wizard Distributors
• Replacement accessories may be obtained from our
main parts distributor: Wizard Distributors
Telephone: 0161 428 3263
• If you are unable to resolve a problem using the
checks covered on the last few pages, do not
attempt to service this microwave oven yourself.
• Contact the dealer or supplier from whom the oven
was purchased in order to obtain service. Where this
is not possible, please contact the SHARP Customer
Information Centre. Telephone: 0845 888 8112
(o ce hours).
DEFROSTING ADVICE CALLING FOR SERVICE
To Next Page
Loading...
Need help?
General
