6
Press the CLOCK pad twice.
x 2
* This oven is preset with the INFORMATION GUIDE.
To assist you in operating your oven, useful information will appear on the display.
In this manual, the display information guide is abbreviated.
BEFORE OPERATING
Step
Procedure Pad Order Display
* To enter the present time of day 11:34 (AM or PM).
Clock Setting
Getting Started
Step
Procedure Display
Plug the oven into a power point and
switch on the power.
Ensure the oven door is closed.
1
MICRO-, WAVE, OVEN will
be displayed repeatedly.
Press the STOP/CLEAR pad so
that the oven beeps.
2
Pad Order
Press the STOP/CLEAR pad once to:
1. Stop the oven temporarily during cooking.
2. Clear if you make a mistake during programming.
3. Clear the message on the display after cooking.
Press the STOP/CLEAR pad twice.
Stop/Clear
To Cancel a Programme During Cooking
The dots (:) will flash on and
off.
3
2
Enter the correct time of day by
pressing the numbers in sequence.
Press the CLOCK pad again.
This is a 12 hour clock. If you attempt to enter an incorrect clock time (eg. 13:45) ERROR will appear in the
display. Press the STOP/CLEAR pad and re-enter the time of day (eg. 1:45).
If you wish to know the time of day during the cooking or timer mode, press the CLOCK pad. As long as your
finger is pressing the CLOCK pad, the time of day will be displayed.
1
STOP
CLEAR
TIMER
CLOCK
Only the dots will remain.
TIMER
CLOCK
SCA/SCNA R398K(S) O/M,P05- 05.9.8, 10:08 AM6
To Next Page
Loading...
Need help?
General
