18
OTHER CONVENIENT FUNCTIONS
x1
x4
x2
x3
x1
Display will
flash
and the time
of day.
AUTO START EXAMPLE
To cook on 50P (MEDIUM) for 20 minutes at 4:00 pm. (Using the 12 hour clock.)
1. Enter the time you want cooking to start, then press
AUTO START/CLOCK once.
2.
Press
10 MINUTE key twice to
enter the desired cooking time.
3. Set the power level, then press
START/AUTO MINUTE.
4. Oven will start pre-
programmed cooking at
set time.
POWER LEVEL
MICROWAVE
AUTO START
CLOCK
1min.
STIR TURN KG GRILL
COOK
MICRO
5. AUTO START
To check the microwave power level during cooking press the MICROWAVE POWER LEVEL key. As long as
your finger is touching the MICROWAVE POWER LEVEL key the power level will be displayed.The oven
continues to count down although the display will show the power level.
6. TO CHECK THE POWER LEVEL
NOTE: This function will only work if the clock has previously been set.
The oven cannot be used once the AUTO START has been programmed. To cancel the program, press
STOP/CLEAR key.
AUTO START enables you to programme
the oven to cook at any time during the:
• next 12 hours (if the 12 hour clock is set).
• next 24 hours (if the 24 hour clock is set).
IMPORTANT: It is recommended the
oven is always attended when in use.
Check to ensure you have programmed
the oven correctly. Exceeding cooking
times and use of excessive power levels
can lead to food overheating and cause
a risk of fire.
• You can use AUTO START only with manual
cooking.
• Before programming the oven, always check the
display is showing the correct time of day.
• Once the oven is programmed for AUTO
START the display will flash between the time
of day and the .
If you press the AUTO START/CLOCK key
and hold, the AUTO START time will be
displayed until you release your finger from the
key.
• If you want to cancel an AUTO START
programme, press the STOP/CLEAR key.
• The AUTO START time can only be entered in
multiples of 10 minutes. It is not possible to
enter less than 10 minutes or any time which is
not in multiples of 10 minutes.
• If the door is opened after programming, close
the door and press the START/AUTO
MINUTE key to continue with AUTO START.