E – 10
Sequence Cooking
Your oven can be programmed for up to 4 automatic cooking sequences, switching from one variable
power setting to another automatically.
Note that POWER LEVEL must be entered first when programming sequence cooking.
* Suppose you want to cook for 10 minutes on MEDIUM followed by 5 minutes on HIGH.
Step
Procedure Pad Order Display
2
1
3
Select desired power level by pressing
the POWER LEVEL pad (for MEDIUM press
three times).
Enter desired cooking time.
Enter desired cooking time.
For second sequence, select microwave
cooking and power level (for HIGH press
the POWER LEVEL pad once).
the second sequence will
appear and the timer will
begin counting down to
zero again.
The timer begins to count
down to zero. When it
reaches zero,
4
Instant Cook™
1
For your convenience Sharp’s Instant Cook allows you to easily cook for one minute on HIGH power.
The timer begins to count
down.
Press the INSTANT COOK/ START pad until desired time is displayed.
Each time the pad is pressed, the cooking time is increased by 1 minute.
5
Step
Procedure Pad Order Display
Press the INSTANT COOK/START pad.
Within one minute of closing the door.
0 001
5 00
COOK will flash on and off.
To Next Page
Loading...
Need help?
General
