Sharp R-950A User Manual

‘Sequence Cooking
Your
oven
canbe
programmed
up
to
4
automatic
cooking
sequences,
switching
from
one
variable
power
setting
to
another automatically.
Note that POWER LEVEL must be entered first when programming sequence cooking,
* Suppose you want to cook for 10 minutes on MEDIUM followed by 5 minutes on HIGH,
Step] Procedure [Pad Order | Display
Select microwave cooking and desired power ,
level by pressing the POWER LEVEL pad (for M E qT H { M
MEDIUM press three times). = - ag
Enter desired cooking time.
For second sequence, select microwave
cooking and power level (for HIGH press
the POWER LEVEL pad once)
Enter desired cooking time for the second
sequence.
Press the INSTANT COOK/START pad. 0 0 0
; —————— a) : COOK
The timer begins to count
down to zero. When it reach-
@S Zero,
ni
the second sequence will ap-
pear and the timer will begin
counting down to zero again.
Instant Cook™
For
your
convenience
Sharp’s
Iristant
Cook
allows
you
to
easily
cook
for
one
minute
on
HIGH
power.
Procedure | PadOrder =| Display
Press the INSTANT GOOK/START pad. ; ' , q
INSTANT COOK ge: HUG:
START The timer begins to count
down.
Within one minute of closing the door, -
Press the INSTANT COOK/ START pad until desired time Is displayed.
Each time the pad is pressed, the cooking time is Increased by 1 minute.

Sharp R-950A Specifications

Power

ac line voltage	220 V
microwave frequency	2450 MHz
ac power required (microwave)	1.6 kW
ac power required (convection)	1.6 kW
ac power required (grill)	1.05 kW
ac power required (simul)	3.15 kW

Oven Specifications

oven capacity	41 litre
output power (microwave)	900 W
output power (convection heater)	1500 W
output power (grill heater)	1000 W

Weight and Dimensions

width	627 mm
height	378 mm
depth	492 mm
cavity width	410 mm
cavity height	245 mm
cavity depth	410 mm
weight	29 kg