EN
4
Cooling model Cooling & heating model
1.
Power key
Press the key to turn ON/OFF the A/C.
2.
Swing key
Press this key at any time after turning on the A/C to swing
the wind guide bar automatically.
3.
Speed key
Press the key to choose high/ low gear wind speed.
4.
Temperature/ time adjusting key
Press the key at cooling mode to increase/reduce the
setting temperature; press it at timing mode to adjust timing
ON/OFF time; press Up and Down keys simultaneously to
switch Fahrenheit and Centigrade degree temperature.
5.
Mode key
Press the key to choose cooling,wind ,dehumidification and
heating(cooling only model has no heating) mode.
6.
Timer key
Press the key at standby mode to set ON time.
Press this key at ON mode to set OFF time.
7.
Temperature/ time display window
This window displays the adjusted temperature and time.
8.
Remote controller receiving window
This window is used to receive signal of the remote
controller.
9.
℃/℉ switching key
Press the key to switch ℃ and ℉.
CONTROL PANEL AND REMOTE CONTROLLER
To Next Page
Loading...
Need help?
General
