Shinco SPS5-10C User Manual

1
1
3
2
4
5
2
3
·
·
15
Timer mode
CLEAN AND MAINTENANCE
CLEANING
In standby state, press the Timer key to set ON time. Press Up and Down keys to set
ON time (1~24H), and the timer indicator lamp lights up.
In ON state, pressure the timer key to set OFF time. Press Up and Down keys to set
OFF time (1~24H), and the timer indicator lamp lights up.
DRAINAGE METHOD
If the internal vessel is full of water, the display screen will display “FL”, and the compressor
stops working automatically. At this point, the water needs to be discharged. The specific
steps are as follows:
Unplug the power cord and take down the exhaust duct assembl
y.
Move the air conditioner to the right place.
Pull off the drain at the drain and drain the water inside
the machine.
Re plug the water plug.
Reinstall the exhaust duct assembly and start the machine.
MAINTENANCECE
I
Unplug before cleaning.
Wipe with soft semi-dry cloth. Don’t use chemical reagent,
such as benzene, alcohol and gasoline etc; otherwise
surface of the A/C and even the whole A/C will be damaged.
Prevent water from spattering in the A/C.

Shinco SPS5-10C Specifications

General

Brand	Shinco
Model	SPS5-10C
Category	Air Conditioner
Language	English