Shure P3RA User Manual

Shure Incorporated
13/16
•
•
Amber 1:05 to 0:30 1:25 to 0:40
Red < 0:30 < 0:40
Total Battery Life 5:30 7:00
Note: Battery life using Energizer brand AA Alkaline batteries and the following conditions:
Receiver audio set to EQ = OFF, V LIMIT = OFF
Audio output at bodypack: Pink noise at 100 dB SPL in ear with SE112 earphones (impedence at 20 Ω)
Power-save mode: When there are no earphones plugged in for 5 minutes, the receiver enters power-save mode to preserve
battery life. The LED slowly fades on/off in this mode and continues to display the color that represents the remaining battery
life.
Specifications
Audio Frequency Response
38 Hz–15 kHz
Operating Range
environment dependent
90 m ( 300 ft)
Active RF Sensitivity
at 20 dB SINAD
2.2 µV
Active RF Gain Control
20 dB
Image Rejection
>90 dB
Adjacent Channel Rejection
>60 dB
Intermodulation Attenuation
>50 dB
Blocking
>60 dB
Audio Output Power
1kHz @ <1% distortion, peak power, @32Ω
80 mW (driving two channels)
™

Shure P3RA Specifications

General

Brand	Shure
Model	P3RA
Category	Receiver
Language	English