Side-Power SR Series User Manual

7
5920
2 2020
-
SR user manual
MG_0100
Check and relubricate with
waterproof grease if necessary
Check and relubricate with
waterproof grease if necessary
Check and relubricate with
waterproof grease if necessary
Zinc anode,
retract mechanism
Zinc anode,
gear leg
* For SR80 & SR100
IF over 3 mm movement,
Break-away rings must be
replaced
Check annually rubber element.
Anode Gearleg
Anode Retract
DO NOT apply antifouling
DO NOT clean with chemicals,
hot water or high-pressure water
jet in this area.

Side-Power SR Series Specifications

General

Brand	Side-Power
Model	SR Series
Category	Outboard Motor
Language	English