Siemens AG 2003, E:\Auftrag\Siemens\MobilePhones\A51_A52 Fox\en\DTC_A52_Main.fm
left page (8) of A52 DTC en, A31008-H6210-A1-1-7619 (12.10.2004, 14:19)
Profiles
8
VAR Language: en; VAR issue date: 040915
Profiles
§Menu§ ¢ Profiles
Three profiles are standard with default
settings, they can be changed however:
Normal environment, Quiet environment,
Noisy environment
You can set two personal profiles
(<Name>).
The special profile Aircraft mode cannot be
changed.
Activate
Select default profile or personal profile
¢ §Select§.
Change setting
Select profile ¢ §Options§ ¢ Change settings
The list of available functions is displayed.
Aircraft mode
The phone will automatically switch off if
you select this profile. Even the alarm
tone is deactivated. An alarm is only
shown on the display. It is not possible to
modify this profile.
Normal operation
The next time you switch on the phone
and return to normal operation the de-
fault profile will be activated.
Setup
Display
§Menu§ ¢ Setup ¢ Display
¢ Select a function.
Language
§Menu§ ¢ Setup ¢ Language
Set the language of the display text.
"Automatic" will set the language of your
home service provider. Reset to this lan-
guage in standby status:
*
# 0 0 0 0 #
A
Screensaver
The screensaver shows a picture on the
display as soon as a period that can be set
by you has elapsed. The function is ended
by an incoming call or by pressing any key.
Call setup
§Menu§ ¢ Setup ¢ Call setup
¢ Select a function.
Hide ID b
When switched off, the display of the call-
ing party shows your phone number (de-
pendent on service provider). To suppress
this display, you can activate the "Hide ID"
mode.
Call waiting b
If you are registered for this service, you
can check whether it is set and you can
activate/deactivate it with Call waiting.
Minute beep
During the call, you will hear a beep after
each minute as a reminder of the time
elapsed.
To Next Page
Loading...
Need help?
General
