EasyManuals Logo
Home>Siemens>Ventilation Hood>LC64PBC50

Siemens LC64PBC50 User Manual

Siemens LC64PBC50
16 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #5 background imageLoading...
Page #5 background image
Operating modes en
5
4  Operating modes
You can use your appliance in air extraction mode or
circulating-air mode.
4.1 Air extraction mode
The air which is drawn in is cleaned by the grease fil-
ters and conveyed to the exterior by a pipe system.
The air must not be discharged into a
flue that is used for exhausting fumes
from appliances burning gas or other
fuels (not applicable to appliances that
only discharge the air back into the
room).
¡ If the exhaust air is to be conveyed
into a non-functioning smoke or ex-
haust gas flue, you must obtain the
consent of the heating engineer re-
sponsible.
¡ If the exhaust air is conveyed
through the external wall, a tele-
scopic duct should be used.
4.2 Air recirculation mode
The air which is drawn in is cleaned by the grease fil-
ters and an odour filter, and conveyed back into the
room.
To bind odours in circulating-air mode,
you must install an odour filter. The dif-
ferent options for operating the appli-
ance in circulating-air mode can be
found in our catalogue. Alternatively,
ask your dealer. The required accessor-
ies are available from specialist retail-
ers, from customer service or from the
Online Shop.

Other manuals for Siemens LC64PBC50

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Siemens LC64PBC50 and is the answer not in the manual?

Siemens LC64PBC50 Specifications

General IconGeneral
BrandSiemens
ModelLC64PBC50
CategoryVentilation Hood
LanguageEnglish

Related product manuals