Siemens Industry, Inc.
Building Technologies Division
A6V10328217_en--_f8
Figure 5
Selecting “DLC Alarm Verification Delay Time (sec.)”
Detectors with “Not Compatible”shown in Table 3 cannot be used with the CZM-1/-1B6
alarm verification feature, but can be used when alarm verification is disabled.
Each detector is assigned a category. Do not mix detectors from different
categories on the same circuit.
ELECTRICAL RATINGS
tnerruCenalPkcaBV42Am82
tnerruCV42lanimreTwercSecivedrepAm5.1+Am09
tnerruCenalPkcaB2.6Am5.1
tnerruCybdnatSV
42ecivedrepAm5.1+Am021