Siemens PXC Modular Series Installation Instructions

Installation Instructions
Document No. 565-411
April 2, 2014
Modbus Driver for PXC-Modular and PXC-36
1
Siemens Industry, Inc.
565-411
These installation instructions cover the connection of
the Modbus and Modbus 250/500/1000 Driver to the
vendor's Modbus system only.
 For hardware installation of the PXC Modular, see
the PXC Modular Series Installation Instructions
(553-638).
 For hardware installation of the PXC-36, see the
PXC Compact 36 Installation Instructions (553-
504).
Product Description
The Modbus and Modbus 250/500/1000 Driver
enables communication between the APOGEE®
Automation System and the Modbus system.
Product Numbers
PXC Modular
PXC00-PE96.A
PXC Modular, Ethernet or RS-485
ALN, 96 FLN nodes
PXC00-E96.A
PXC Modular, BACnet/IP or MS/TP
ALN, 96 FLN nodes
PXC100-PE96.A
PXC Modular, Ethernet or RS-485
ALN, 96 FLN nodes, TX-I/O module
support
PXC100-E96.A
PXC Modular, BACnet/IP or MS/TP
ALN, 96 FLN nodes, TX-I/O module
support
PXX-485.3
Expansion Module, three RS-485
FLN connections
PXC-36
PXC36-PE.A
PXC Compact, 36 point, Ethernet/IP
or RS-485 ALN
PXC36-E.A
PXC Compact, 36 point, BACnet/IP
or MS/TP ALN
PXC36-PEF.A
PXC Compact, 36 point, Ethernet/IP
or RS-485 ALN. Includes licenses
for TX-I/O module and P1 FLN
support.
PXC36-EF.A
PXC Compact, 36 point, BACnet/IP
or MS/TP ALN. Includes licenses
for TX-I/O module and P1 FLN
support.
Licenses
LSM-INT-MDBS
License for Modbus Driver on PXC
Modular or PXC-36
LSM-INT-
MDBS1000
License for Modbus 1000 Driver on
PXC Modular or PXC-36
LSM-INT-
MDBS500
License for Modbus 500 Driver on
PXC Modular or PXC-36
LSM-INT-
MDBS250
License for Modbus 250 Driver on
PXC Modular or PXC-36
Accessories
538-670
Trunk Interface II, 115V
538-675
Trunk Interface II, 230V
538-755
Trunk/RS-422 Interface (115V
Power)
538-760
Trunk/RS-422 Interface (230V
Power)
536-004
RS-232 Cable
Caution Notation
CAUTION
Equipment damage or loss of data
may occur if you do not follow a
procedure as specified.
Expected Installation Time
The expected installation time is 7 minutes if no cable
must be made and the driver does not use a Trunk
Interface (see Figure 2), or 30 minutes if a cable must
be made or if the driver uses a Trunk Interface (see
Figure 1 and Figure 2).
Required Tools and Materials
 Flat-blade screwdriver (1/8-inch blade width).
 Wire strippers.
 Cabling and connectors. See the Connecting the
Driver to the Vendor's Modbus Master or Modbus
Slave Devices section.

Siemens PXC Modular Series Specifications

General

Brand	Siemens
Model	PXC Modular Series
Category	Control Unit
Language	English