– devices of the ranges Desigo RXC, RXB, RXL, and RXA (PPS2)
• Room temperature measurement
• Room temperature setpoint adjuster
• Control mode selector switch (
/ Auto)
• PPS2 interface to controller
• Socket for commissioning and service tool or service terminal
Use
The room unit is used in rooms controlled by an individual room control system, to
measure the room temperature and for operation of a room controller.
It can also be used in conjunction with a Desigo PXC… automation station
1)
.
The room unit incorporates a socket for a commissioning and service tool or service
terminal. This tool socket provides access via the PPS2 interface or via a bus system
(e.g. L
ONWORKS® bus) to the connected individual room controller.
1) If room units QAX32.1, QAX33.1, QAX34.1 or QAX84.1 are used in conjunction with a PXC
automation station, the room unit will show the request of the user and not the effective state.
To Next Page
Need help?
General
