Siemens SIMATIC NET SCALANCE W M763-1 Series Reference Manual

Marking for the customs union
EAC (Eurasian Conformity)
Eurasian Economic Union of Russia, Belarus, Armenia, Kazakhstan and Kyrgyzstan
Declaration of conformity according to the technical regulations of the customs union (TRZU)
1.6 National approvals
The following table lists the countries in which the SCALANCE WxM766-1 product is
approved.
All countries or frequency ranges in which only time-limited approval applies are marked
with the rhombus symbol (♦). This marking is for information purposes. Time-limited
approvals are usually extended by Siemens in the time between delivery release and product
phase-out of the devices.
Depending on the antenna settings in use, a special regulation of the transmit power may be
required in some countires.
The current status of the approvals can be found on the Internet at the following address:
Approvals (
https://www.siemens.com/wireless-approvals).
Column Meaning
Country Country
Mode IEEE 802.11 standard and the DFS functionality, where required
CH IEEE 802.11 channel
MHz IEEE 802.11 frequency
PWR (EIRP) Maximum permitted e󹪜ective isotropic radiated power
Max. permitted
gain
Maximum permissible antenna gain with
3)
or without additional attenuation
4)
Use Permitted use indoors and / or outdoors
SCALANCE WxM766-1
1.6National approvals
Approvals SCALANCE W700 802.11ax
Reference Manual, 04/2023, C79000-G8976-C621-05 21

Siemens SIMATIC NET SCALANCE W M763-1 Series Specifications

General

Brand	Siemens
Model	SIMATIC NET SCALANCE W M763-1 Series
Category	Industrial Equipment
Language	English