EasyManuals Logo
Home>Siemens>Industrial Equipment>SIMATIC NET SCALANCE W M763-1 Series

Siemens SIMATIC NET SCALANCE W M763-1 Series Reference Manual

Siemens SIMATIC NET SCALANCE W M763-1 Series
54 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #51 background imageLoading...
Page #51 background image
Country Mode CH MHz PWR
(EIRP)
Max. permitted
gain
Use
United Kingdom 11ax 11g 11n 1
-
13
2412
-
2472
100 mW - Indoor + Outdoor
11a 11ac 11ax
11n
36
-
48
5180
-
5240
200 mW 11 dBi (2 Tx)
3)
14 dBi (1 Tx)
3)
Indoor only
11a 11ac 11ax
11n
DFS
52
-
64
1)
5260
-
5320
200 mW 11 dBi (2 Tx)
3)
14 dBi (1 Tx)
3)
Indoor only
100
-
140
1)
5500
-
5720
1000 mW - Indoor + Outdoor
11a 11ac 11ax
11n
149
-
165
5745
-
5825
25 mW 10 dBi (2 Tx)
3)
13 dBi (1 Tx)
3)
Indoor + Outdoor
1) In this country the use of 80MHz channel width is not permitted in the channels 52 to 140.
2) The maximum permitted EIRP (E󹪜ective Isotropic Radiated Power) may only be reached with at least one 6 dBi antenna.
3) Maximum permissible gain: Antenna and additional attenuation elements
4) Maximum permissible gain of the antenna without additional attenuation elements
5) The use of the antennas ANT897-4ME, ANT897-5PN, ANT795-6MP, ANT793-8DK, ANT793-8DJ, ANT793-8DP, ANT793-8DL,
ANT792-4DN, ANT793-4MN and IWLAN RCoax Cable 2.4 GHz and 5 GHz is not approved for this country.
6) Use US device version
7) The antennas ANT792-8DN, ANT795-6DC, ANT792-6MN, ANT793-6DG and ANT795-6MN may only be used together with a
󹪞exible connecting cable with a length of ≥ 2m.
Maximum permissible gain: Antenna and additional attenuation elements
When using antennas with a very high antenna gain, the maximum permitted EIRP (equivalent
isotropic radiated power) of the device is often exceeded even at minimum transmit power.
Additional attenuation elements must therefore be used between the device and the antennas.
The "Max. permitted gain" column in the table above shows the maximum permitted antenna
gain (total value) that can be connected to the antenna sockets of the devices. If the typical
antenna gain of the antennas to be connected exceeds the maximum permissible value, you
must compensate for the di󹪜erence by using attenuation elements, for example, an attenuator
or connecting cables.
The following table provides an overview of possible attenuation elements and their
attenuation values:
Name Attenuation Article number
Attenuator 10dB 6GK5798-0AP00-4CA0
Antenna connecting cable, 1m long 1.0dB 6XV1875-5xH10
Antenna connecting cable, 2m long 1.8dB 6XV1875-5xH20
Antenna connecting cable, 5m long 4.3dB 6XV1875-5xH50
SCALANCE WxM763-1
2.6National approvals
Approvals SCALANCE W700 802.11ax
Reference Manual, 04/2023, C79000-G8976-C621-05 51

Other manuals for Siemens SIMATIC NET SCALANCE W M763-1 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Siemens SIMATIC NET SCALANCE W M763-1 Series and is the answer not in the manual?

Siemens SIMATIC NET SCALANCE W M763-1 Series Specifications

General IconGeneral
BrandSiemens
ModelSIMATIC NET SCALANCE W M763-1 Series
CategoryIndustrial Equipment
LanguageEnglish

Related product manuals