Siemens SIMATIC NET SCALANCE XB-200 Series User Manual

Introduction
1
Purpose of the Operating Instructions
These operating instructions support you when installing and connecting up devices of the
SCALANCE XB-200 product group.
The configuration and the integration of the devices in a network are not described in these
operating instructions.
Validity of the Operating Instructions
These operating instructions apply to the following devices:
● SCALANCE XB208
● SCALANCE XB205-3 (SC)
● SCALANCE XB205-3LD (SC)
● SCALANCE XB205-3
● SCALANCE XB216
● SCALANCE XB213-3 (SC)
● SCALANCE XB213-3LD (SC)
● SCALANCE XB213-3
Unless mentioned otherwise, the descriptions in these operating instructions refer to all devices
of the SCALANCE XB-200 product group named above in the section on validity.
There are two variants of each device, refer to the section "Product overview (Page 17)".
Designations used
Classification Description Terms used
Product line The product line includes all devices and variants of all product groups.
If information applies to all product groups within the product line, the term
SCALANCE X-200 is used.
SCALANCE X-200
Product group If information applies to all devices and variants of a product group, the term
SCALANCE XB-200 is used.
SCALANCE XB-200
Device If information relates to a specific device, the device name is used. e.g. SCALANCE XB205-3
SCALANCE XB-200
Operating Instructions, 03/2020, C79000-G8976-C359-09 5

Siemens SIMATIC NET SCALANCE XB-200 Series Specifications

General

Brand	Siemens
Model	SIMATIC NET SCALANCE XB-200 Series
Category	Switch
Language	English