Siemens SIMATIC NET SCALANCE XB-205-3LD User Manual

Removal


PUSH
Figure 5-2 Removing from a DIN rail
To remove the device from a DIN rail, follow the steps below:
1. Disconnect all connected cables.
2. Release the DIN rail locking mechanism by pressing down on the release button ①.
3. Pull the lower part of the device away from the DIN rail ②.
Installation
5.2 Mounting on DIN rails
SCALANCE XB-200
Operating Instructions, 03/2020, C79000-G8976-C359-09 31

Siemens SIMATIC NET SCALANCE XB-205-3LD Specifications

General

Mounting Type	DIN rail, wall mounting
Protection Class	IP30
MAC Addresses	8192
Weight	0.5 kg
Product Type	Industrial Ethernet Switch
Power Supply	24 V DC
Switching Capacity	1 Gbit/s
Redundancy functions	RSTP
Standards	IEEE 802.3, IEEE 802.3u, IEEE 802.3x
Ports	5 x 10/100 Mbit/s RJ45 ports, 3 x 100 Mbit/s LC ports
Operating Temperature	-40 to 70 °C