Siemens WG44G209GB User Manual

Cleaning and servicing en
35
15.2 Changing the basic set-
tings
1. Set the programme selector to po-
sition 1.
2. Press Spin Speedand, at the
same time, turn the programme
selector to position2.
a The display shows the current
value.
3. Set the programme selector to the
required position.
→"Overview of the basic settings",
Page34
4. To change the value, press Ready
In.
5. To save the changes, switch off
the appliance.
16 Cleaning and servi-
cing
To keep your appliance working effi-
ciently for a long time, it is important
to clean and maintain it carefully.
Note:You can find further information
in the digital instruction manual by
scanning the QR code in the table of
contents or on siemens-home.bsh-
group.com .
16.1 Cleaning the drum
CAUTION
Risk of injury!
Permanently washing at low temper-
atures and a lack of ventilation for
the appliance may damage the drum
and cause injury.
▶ Regularly run a programme for
cleaning the drum or wash at tem-
peratures of at least 60°C.
▶ Leave the appliance to dry after
every operation with the door
open, and leave the detergent
drawer to dry.
▶ Run the Drum Clean programme
without laundry and using all-pur-
pose washing powder.
16.2 Cleaning the detergent
drawer
1. Pull out the detergent drawer.
2. Press down on the insert and re-
move the detergent drawer.

Siemens WG44G209GB Specifications

General

Brand	Siemens
Model	WG44G209GB
Category	Washer
Language	English