Silvercrest 4160 User Manual (English)

Questions and Answers:

K
Kurt WadeAug 1, 2025
What to do if no steam comes out of my Silvercrest Steam Cleaner nozzle?
- M
  Manuel WilliamsAug 1, 2025
  If no steam is coming out of the nozzle of your Silvercrest Steam Cleaner, there might be several reasons: * Ensure you are pressing the steam dispensing button all the way down. * The appliance may not be ready; press the steam dispensing button for about 30 seconds, or until you hear the pump noise, and then wait for the steam. * Check if the water tank is short of water; if so, fill the tank with fresh water up to the lower rim of the threading. * The tank may not be inserted correctly; remove the tank and reinsert it, ensuring it is in the right position.
K
Karen SmithAug 10, 2025
Why is my Silvercrest 4160 Steam Cleaner pump so noisy?
- W
  woodsstephenAug 10, 2025
  An unexpected increase in the noise level of your Silvercrest Steam Cleaner pump could be due to a water shortage in the tank, in which case you should turn off the appliance and fill the water tank. Alternatively, the tank might not be inserted correctly. Remove the tank and put it back in, making sure it is in the right position.
J
Jacob BatesAug 22, 2025
What to do if my Silvercrest 4160 is leaking water from the nozzle?
- A
  amywrightAug 22, 2025
  If your Silvercrest Steam Cleaner is leaking water from the nozzle, it could be due to condensation residue in the steam duct. Try pressing the steam dispensing button until steam comes out, positioning a soft cloth to absorb any water. If water continues to leak, turn off the appliance and wait at least 5 minutes for the steam head and cloth to cool down, then try again.