Silvercrest SBL 3 C3 User Manual

GB/IE/NI18
Use
Charging the rechargeable battery
The rechargeable battery must be charged prior to first use.
The low rechargeable battery indicator
6
flash and an
acoustic signal sounds when the rechargeable battery is
drained. The rechargeable battery should then be charged
as soon as possible.
Plug the micro-USB plug on the charging cable
14
into the
micro-USB charging socket
12
on the product.
Plug the USB-A plug on the charging cable into the USB port
on a PC or a USB adapter (not included).
NOTE: The rechargeable battery indicator
5
will flash
while charging. Once the rechargeable battery is fully
charged, the
rechargeable battery indicator
5
lights up.
Once fully charged, disconnect the micro-USB plug from the
product.
Close the cover of the charging socket (micro-USB)
12
.
Switching the product on / off
Press and hold the button
1
for approx. 2 seconds to
switch the product on and an acoustic signal sounds.
Press and hold the button
1
again for approx. 2 seconds
to switch the product off and and an acoustic signal sounds.

Silvercrest SBL 3 C3 Specifications

General

Brand	Silvercrest
Model	SBL 3 C3
Category	Speakers
Language	English