34 US-EN
Connecting via the AUX-in
jack
NOTE: Music playback via the AUX-in
jack
1
has a higher priority over a Bluetooth®
connection.
Once the AUX cable
13
is plugged into the
AUX-in jack
1
, the Bluetooth® wireless
connection will be disconnected. Music
playback is now switched to AUX-in only
and the LED
2
lights up green.
If the product is off, press and hold the
button
8
until the signal LED
2
lights up
green and a signal tone sequence sounds.
Switch the playback device on and start
playback.
Adjust the volume on the playback device to
the highest possible volume then adjust the
volume on the product using the
9
and
To Next Page
Loading...
Need help?
General
