30 US-EN
Connecting via the AUX-in jack
NOTE: Music playback via the AUX-in jack
1
has a
higher priority over a Bluetooth® connection.
Once the AUX cable
13
is plugged into the AUX-in
jack
1
, the Bluetooth® wireless connection will be
disconnected. Music playback is now switched to AUX-in
only and the LED
2
lights up green.
If the product is off, press and hold the
button
8
until the signal LED
2
lights up green and a signal tone
sequence sounds.
Switch the playback device on and start playback.
Adjust the volume on the playback device to the highest
possible volume then adjust the volume on the product
using the
9
and
7
buttons.
Switching between AUX-in
and Bluetooth
®
connections
To resume music playback via Bluetooth® connection
unplug the AUX cable
13
from the AUX-in jack
1
.
To Next Page
Loading...
Need help?
General
