Silvercrest SFKS 2 A1 User Manual

11
SFKS 2 A1
GB
IE
Disposal of packaging materials
The packaging protects the appliance from damage
during transport. The packaging materials have been
selected for their environmental friendliness and ease
of disposal, and are therefore recyclable.
Returning the packaging into the material
cycle conserves raw materials and reduces
the amount of waste generated.
Dispose of packaging materials that are no longer
needed in accordance with applicable local regulations.
Power supply: receiver
The receiver is plugged into a properly installed mains
power outlet and does not require batteries.
Inserting/replacing the batteries
♦ Insert the unlocking tool 1 into the recess on the side
of the transmitter and turn it to the side to remove the
mounting plate  (see Fig. 1).
♦ Insert a 3V battery, type CR 2032, into the battery
compartment . The side of the battery marked with
a “+” must be facing upwards.

Silvercrest SFKS 2 A1 Specifications

General

Brand	Silvercrest
Model	SFKS 2 A1
Category	Accessories
Language	English