Silvercrest SKS 4 A1 User Manual

GB
│
IE
│
NI
│
15 ■
SKS 4 A1
♦ Select the desired melody with the arrow buttons ▲ ▼ -and press the SET
 button. Press the SET button again to return to the previous menu .
♦ To exit the setup menu, use the arrow buttons ▲ ▼
-to select the symbol
and press the SET button
.
Switching the illuminated area on/off
By default, the light of the illuminated area is activated. This means that, de-
pending on the time of day and the setting, one or both halves of the illuminated
area
are permanently illuminated as soon as the main switch ! is in the
(light + sound) or (light only) position.
If the alarm is only to be activated with sound and you do not want to use the
night light, you can completely deactivate the LED light of illuminated area
.
♦ In standby mode
(face or time on the display ), press and hold the SET
button
for approx. 3 seconds to call up the main menu. The symbol for
the time setting
flashes on the display .
♦ Use the arrow buttons ▲ ▼
-to select the symbol for the light setting and
press the SET button
.
♦ Select
to turn off the light or to turn the light back on again.
♦ To exit the setup menu, use the arrow buttons ▲ ▼
-to select the symbol
and press the SET button
.
Setting the illuminated area
You can make your own settings for the two LED lights of the illuminated area .
NOTE
► The light must be activated. When the light is deactivated, neither of the
two LEDs lights up (see section "Switching the illuminated area on/off").
♦ In standby mode
(face or time on the display ), press and hold the SET
button
for approx. 3 seconds to call up the main menu. The symbol for
the time setting
flashes on the display .
♦ Use the arrow buttons ▲ ▼
-to select the symbol for the illuminated area
and press the SET button .
♦ Use the arrow buttons ▲ ▼
-to set the desired function:
–
: Both halves of the illuminated area  always light up when the
light is switched on and in the event of an alarm.
– : When the light is switched on and in the event of an alarm, only one
of the two halves of the illuminated area
 lights up.
♦ To exit the setup menu, use the arrow buttons ▲ ▼
-to select the symbol
and press the SET button
.

Silvercrest SKS 4 A1 Specifications

General

Brand	Silvercrest
Model	SKS 4 A1
Category	Toy
Language	English