SilverCrest SMZG500 A1
16 - English
Troubleshooting
If your Mini Chopper does not work as normal, follow the instructions below to try to solve the problem. If
working through the tips below does not fix the fault, please contact our hotline (see "Warranty
information" on page 17).
Risk of electric shock!
Never try to repair the device yourself.
Problem Possible causes Remed
Mini Chopper not
working
Mains plug not connected Connect the power cable (4) to a live mains
socket.
Motor unit (2) not fitted
correctly to lid (3)
Place the motor unit (2) properly on to the lid
(3). See steps 7 to 9 in the section on "Setting
up and filling the Mini Chopper" on page 11.
The cutting blades
(5) or emulsifying
disc (6) are turning
slowly or not at all.
Cutting blades (5) or
emulsifying disc (6) are
blocked or the food is too
tough.
Remove any solid objects from the glass
bowl (7).
If necessary, add a little liquid to the glass
bowl (7).
Check that you have assembled the Mini
Chopper correctly.
Environmental regulations and disposal information
If this symbol depicting a crossed-out rubbish bin appears on a product, the product is
subject to European Directive 2012/19/EU. All electrical and electronic devices must
be disposed of separately from household waste at official disposal centres.
Do not dispose of the appliance in household waste or bulky waste collections.
Information on collection points and pick-up times can be obtained from your local
council or waste disposal company.
Dispose of all packaging in an environmentally friendly manner. Cardboard packaging can be taken to
paper recycling centres or public collection points for recycling. Any film or plastic contained in the
packaging should be taken to your public collection points for disposal.
To Next Page
Loading...
Need help?
General
