MRMap Development Team 21/07/2008
On the opening page of the Simoco programming software application, ensure that
the Frequency range is correct for the channels you will be programming and that
the Accessory option has been set to RSM-GPS, the GPS speaker microphone.
Failure to do this will mean the programming page for the microphone is not later
displayed.
The Radio Type will be either SRP9120 (No Keypad) or SRP9130 (Full numeric
keypad)
Programming for use with a GPS microphone.
The programming software is available free of charge from the TMC website at
www.tmcradio.com (
Note: The version on the Simoco website is not usually current)
Connection between the radio and the computer running the software is via the
programming lead supplied by Simoco.
Initially, connect the radio and switch on, select Read Radio from the menu
options and this will upload the current configuration file from the radio. This can be
modified as required and reloaded into the radio.
To Next Page
Loading...
Need help?
General
