Simplicity SMF2 User Manual

6903-002002 <01>
12
CAUTION:
2
Wall Mounting
2-1: Wood Stud Mounting
CAUTION: Improper use could reduce the holding power of the lag bolt. To avoid potential injuries or property damage:
 Pilot holes MUST be drilled to a depth of 75 mm (3 in.), using a 5.5 mm (7/32 in.) diameter drill bit.
 Do not over-tighten the lag bolts [08].
 Any material covering the wall must not exceed 16 mm (5/8 in.).
2-2: Solid concrete and Concrete Block Mounting
CAUTION: Improper use could reduce the holding power of the lag bolt. To avoid potential injuries or property damage:
 Pilot holes MUST be drilled to a depth of 75 mm (3 in.), using a 10 mm (3/8 in.) diameter drill bit.
 Be sure the anchors [10] seat  ush with the concrete surface.
 Mount wall plate directly onto the concrete surface.
 Never drill into the mortar between blocks.
 Do not over-tighten the lag bolts [08].
3.72”
94.5mm
3.72”
94.5mm
3.72”
94.5mm
NOTE: Mount will shift 3.72” (94.5 mm) in either direction
from the center when in the home position. Consider this
when selecting the location of your wall mount.
3.72”
94.5mm

Simplicity SMF2 Specifications

General

Brand	Simplicity
Model	SMF2
Category	Racks & Stands
Language	English