To Next Page

To Previous Page

Connecting Machine to Power Source

Connect the machine to a power source as illustrated. (1)

This appliance is equipped with a polarized plug which must

be used with the appropriate polarized outlet. (2)

Unplug power cord when machine is not in use.

The foot control pedal regulates the sewing speed. (3)

Consult a qualified electrician if in doubt of how to connect

machine to power source.

Unplug power cord when machine is not in use.

The foot control must be used with the appliance by KD-1902

(110-120V area)/ KD-2902 (220-240V area) manufactured by

ZHEJIANG FOUNDER MOTOR CORPORATION LTD.

(China)

4C-316B (110-120V area)/ 4C-326G (230V area) manufactured

by Wakaho Electric Ind. Co., Ltd. (Vietnam)

Press main switch (A) to " l " for power and light.

For appliance with a polarized plug (one blade is wider than

the other). To reduce the risk of electric shock, this plug is

intended to fit in a polarized outlet only one way. If it does

not fit fully in the outlet, reverse the plug. If it still does not

fit, contact a qualified electrician to install the proper outlet.

Do not modify the plug in any way.

a. Polarized attachment plug

b. Conductor intended to be grounded

Attention:

Foot control

Attention:

Sewing light

IMPORTANT NOTICE

Singer 3229 User Manual

Other manuals for Singer 3229