Singer 6660 User Manual

58
MANUAL BUTTONHOLE
* Use the automatic buttonhole foot up to 1
3/4 “(45 mm) in length, but don’t lower the
buttonhole lever or a beep will sound.
* Use the satin foot to create larger
buttonholes.
* Carefully mark the buttonhole length on
your garment. Place the fabric with the
buttonhole marked under the buttonhole
foot. Slide the foot forward so that the
needle pierces the fabric at the beginning
of the buttonhole.
1
2
PROCEDURE
1. Start the machine to form first bartack
and left side of buttonhole.
2. Sew second bartack and stitch backward
until needle reaches beginning of
buttonhole.
3. Stitch forward to the end of buttonhole
mark to complete buttonhole.
4. Push the reverse stitch switch to tie off
the stitches.
3
4
NOTE: If stitch length is manually set
at 0.8 (mm) for step 1, set the stitch
length at 0.8 (mm) for step 3 as well.

Singer 6660 Specifications

General

Built-in Needle Threader	Yes
Free Arm	Yes
Drop Feed	Yes
LED Lighting	Yes
Type	Electronic
Adjustable Stitch Length/Width	Yes
Needle Threader	Yes
Max Stitch Width	7 mm
Display	LCD Screen