Sequence Mode, stitches in memory
Press the Sequence button to enter sequence mode. Letters and
numbers that can be programmed and are found on Stitch
Menu 4, Fonts. This menu is selected automatically when
entering sequence mode.
1. Number of currently selected stitch
2. Recommended presser foot — indicate what presser foot
that is recommended to use for the selected stitch to obtain
the best stitch result
3. Position of the currently selected stitch — indicate what
position the currently selected stitch has in the sequence
4. Total number of stitches in the sequence — total number
of stitches allowed (40 positions)
5. Sequence Mode — indicate that sequence mode is active
6. Repeat — indicate that repeat sequence is activated. The
sequence will be sewn repeatedly until you stop sewing.
7. Active stitch menu — Stitches that can be programmed
are found on Stitch Menu 4, Fonts. This menu is selected
automatically when entering programming mode.
8. Width of the currently selected stitch.
9. Length of the currently selected stitch.
Note: When the settings shown on the display are set to default,
their corresponding figures will be framed (A). If you change
the settings the frame around the figures will be will be
removed.
22 – Operating Your Machine
English
To Next Page
Loading...
Need help?
General
