Singer S10 User Manual

8
q
w
e
q
q
w
Winding & Inserting the Bobbin
Removing Bobbin from Bobbin Case
Step
z
Slide the bobbin case cover plate release button to the
right to remove the bobbin case cover plate.
z
x
z
x
c
Step
x
Lift out the bobbin from the bobbin case.
q
Bobbin case cover release button
w
Bobbin case cover
e
Bobbin
Preparing Thread Spool
Step
z
Place the large spool cap on the spool pin as shown.
q
Large spool cap
Step
x
Place the spool of thread on the spool pin with the
thread coming off the spool as shown. Attach the large
spool cap, and press it firmly against the spool of
thread.
q
Large spool cap
w
e
r
q
Step
c
Use the small spool cap to hold narrow or small
spools of thread.
w
Small spool cap
Using Auxillary Spool Pin
Use the auxiliary spool pin when you need to wind the
bobbin without unthreading the machine while working on
an embroidery.
Insert the auxiliary spool pin into the spool stand and
then into the hole.
Place the felt on the auxiliary spool pin and place a spool
of thread on it as shown.
q
Auxiliary spool pin
w
Spool stand
e
Hole
r
Felt

Singer S10 Specifications

General

Brand	Singer
Model	S10
Category	Sewing Machine
Language	English