Singer SFC610 - Coffee Maker Operation and Maintenance; Using the Coffee Maker

5
ENGLISH
USING THE COFFEE MAKER
1. Open the water tank lid and fi ll with water according to the cups of coffee you want to prepare.
2. Ensure the water level does not exceed the max level marking.
3. Close the water tank lid.
4. Open the fi lter cup and put as much coffee powder as you need into the permanent fi lter or
paper fi lter.
Note: Make sure the fi lter cone has been assembled correctly into the fi lter cup as below:
Turn the shower head to point to the center of the permanent fi lter or fi lter paper.
5. Close the fi lter cup.
6. Ensure that the carafe is placed properly in its position.
7. Switch on the appliance. The indicator light on the on/off switch illuminates to indicate the
unit is on.
Note: Use the aroma regulator to obtain mild or strong coffee.
- To obtain mild coffee, turn the aroma regulator to position
- To obtain strong coffee, turn the aroma regulator to position
The appliance will brew until the water tank is emptied, then automatically enter into keep-warm
mode.
8. After ending the use of the coffee maker, turn the coffee maker off.
Note!
- Use only cold water.
- Between the brewing process, switch off the appliance and let cool down for 5 minutes.
The tab must fall into the hole completely
Hole on the fi lter holder
Filter holder Shower head
Aroma regulator
Tab on the fi lter coneFilter cone