SKY-WATCHER EQ6 User Manual

7
Fig.15
Fig.16
INSERTING THE EYEPIECE (Fig.15, 16)
1) Unscrew the thumbscrews on the end of the focus
tube to remove the black plastic end-cap.
2) Insert the desired eyepiece and secure it by
retightening the thumbscrews.
EYEPIECE ASSEMBLY (for reflectors)
Fig.17
INSERTING THE EYEPIECE (Fig.17)
1) Loosen the thumbscrew on the end of the focus tube.
2) Insert the diagonal into the focus tube and re-tighten
the thumbscrew to hold the diagonal in place.
3) Loosen the thumbscrews on the diagonal.
4) Insert the desired eyepiece into diagonal and secure
by re-tightening the thumbscrews.
EYEPIECE ASSEMBLY (for refractors)
Fig.18
Locate the hand control holder. Slide
the holder onto the accessory tray as
shown in Fig.6.
INSTALLING THE HAND CONTROL
HOLDER (Fig.18)
(for SynScan
TM
only)
HAND CONTROL HOLDER INSTALLATION

SKY-WATCHER EQ6 Specifications

General

Brand	SKY-WATCHER
Model	EQ6
Category	Accessories
Language	English