Skywalk MINT User Manual

PRO GUIDE // MINT
Make sure that the openings at the leading edge
are neatly aligned. The Rigid Foils on the stabilos
must also be pulled up towards the remaining
leading edge.
Now sort the rest of the canopy lengthwise to
the trailing edge, making sure that the Rigid
Foils lie neatly lengthwise and are not twisted.
Stow the risers into the riser bag
and place the lines into the Guard-
bag.
Carefully close the zipper, being careful not to
pinch any lines or paraglider material.
Place the packing tube at the level of the second
webbing strap.
Fold the leading edge over the Packing Tube.
Fold the other end over the folded side.
Tip: For a particularly gentle storage, lay out the Guardbag lengthwise when not
using the paraglider.
17 PACKING INSTRUCTIONS
Carefully packing your paraglider guarantees a consistently high level of quality.
Stick to the packing instructions described here to protect the Rigid Foils and use the
included packing tube to avoid unnecessary bending or kinking of the Rigid Foils.
The supplied Guardbag simplifies the packing process.
Gather your glider and lay it next to the Guardbag.
The lines should protrude out of the trailing edge.
At the bottom of the Guardbag there is a riser bag,
here the risers will be stowed away later. The trailing
edge should be in the direction of the riser bag.
.
Now stack Rigid Foil on Rigid Foil, starting at the stabi-
lo and working your way to the other stabilo.
With this technique, the glider
lies together like an accordion
from wing tip to wing tip and is
not folded in the center of the
glider. Thus, neither the center
cells nor the Rigid Foils are sub-
jected to increased stress.
The openings at the leading edge
must be aligned with the center
of the Guardbag.
Secure the glider with the webbing
straps.
Packing Instructions 15
14 Packing Instructions

Skywalk MINT Specifications

General

Brand	Skywalk
Model	MINT
Category	Aircrafts
Language	English