Skywalk PACE User Manual

3 TECHNICAL DATA
Size
Cell number
Area flat (m²)
Wingspan flat (m)
Aspect ratio flat
Area projected (m²)
Wingspan projected (m)
Aspect ratio projected
min. profile depth (cm)
max. profile depth (cm)
Middle line length without risers (m)
Line consumption (m)
Weight (kg)
Take-off weight from - to (kg)
Winch certified
JET FLAP Technology
Paramotor homologation
Accelerator
Brake line travel max. (cm)
Trimmers
Number of seats
4 LINE SYSTEM
The layout of the suspension points is designed for optimal load distribution and a long
lifespan. With all considerations and calculations however, our focus is always on safety.
The mix of materials used on the lines of the PACE is an ideal combination of durability,
low stretch and low drag.
The skywalk PACE has 3 A-, 3 B-, 1 C-, 1 D-, and 1 stabilo line.
The main-stabilo is connected with the B-riser. The brake lines are not load-bearing and
lead from the trailing edge over the main brake lines through the brake pulleys on the
C-risers to the brake handles. A marking on the main brake line indicates the position of
the handle attachment.
This setting should not be lengthened, for example, to provide more brake travel in extreme
flight situations or during landing, nor shortened such that the glider is flown constantly
with some brake on.
Technical data 5
70+ 85+ 95+
41 41 41
16,00 18,00 20,00
8,39 8,90 9,38
4,4 4,4 4,4
13,63 15,34 17,04
6,72 7,13 7,51
3,31 3,31 3,31
78 83 87
229 243 256
5,37 5,70 6,00
295 314 332
1,05 1,15 1,24
50-90 65-100 70-110
yes yes yes
no no no
no no no
no no no
61 62 66
no no no
1 1 1

Skywalk PACE Specifications

General

Brand	Skywalk
Model	PACE
Category	Aircrafts
Language	English