As the user’s hands enter the beam’s effective range, the beam is reflected back into the sensor receiver and
activates the solenoid valve allowing water to flow from the faucet. Water will flow until the hands are removed or until
the faucet reaches its automatic time-out limit setting.
CARE AND CLEANING
DO NOT use abrasive or chemical cleaners (including chlorine bleach) to clean faucets that may dull the luster and
attack the chrome or special decorative finishes. Use ONLY mild soap and water, then wipe dry with a clean cloth or
towel. While cleaning the bathroom tile, protect the faucet from any splattering of cleaner. Acids and cleaning fluids
will discolor or remove chrome plating.
When assistance is required, please contact Sloan Technical Support at: 1-888-SLOAN-14 (1-888-756-2614).
The information contained in this document is subject to change without notice.
File Downloads
To Next Page
Loading...
Need help?
General
