SMC Networks Barricade User Manual

-11-
there must be something wrong in your installation procedure. You have to check the
following items in sequence:
1. Is the Ethernet cable correctly connected between this product and your computer?
Tip: The LAN LED of this product and the link LED of network card on your
computer must be lighted.
2. Is the TCP/IP environment of your computers properly configured?
Tip: If the IP address of this product is 192.168.123.254, the IP address of your
computer must be 192.168.123.X and default gateway must be 192.168.123.254.
Now, you can configure the Internet Sharer (refer to Chapter 4).
3.2 Install the Software into Your Computers
Skip this section if you do not want to use the print server function of this product.
Step 1: Insert the installation CD-ROM into the CD-ROM drive. The following window
will be shown automatically. If it isn’t, please run “i nstall.exe” on the CD-ROM.

SMC Networks Barricade Specifications

General

Brand	SMC Networks
Model	Barricade
Category	Network Router
Language	English