TEN REASONS FOR CHOOSING THE FAS200 SYSTEM
1. The FAS200 is manufactured entirely from industrial grade materials of maximum
strength and quality.
2. It complies with European safety directives in respect of both low voltage and
machine safety.
3. It may include pallet transfer integrate several modules allowing.
4. The process stations or layouts can work independently or integrated in the system in
cell mode.
5. The PLCs needed for system control are included, with mains supply
connection, and users may design their own electrical control gear based on other,
different, PLCs.
6. Each of the most of the modules incorporates a key-protected Fault Generation
System which makes it possible to work on diagnostic and repair capabilities, using the
“Switches” methodology .
7. The FAS200 cell has been designed for assembly of a turning mechanism with a total
of 24 variants.
8. The pallets and transfer incorporate a binary coding system using inductive
detectors, which allow the Control System to identify the position of each pallet at any
time.
To Next Page
Loading...
Need help?
General