8
Figure 3-5
*
The figure is to illustrate the application and principle. The power plug you get from the package
and the socket in your situation will comply with the regulation in your country, so they may differ
from the figure above.
Note:
If you intend to connect the Switch to the ground via the PE (Protecting Earth)
cable of AC power cord, please make sure the PE (Protecting Earth) cable in the
electrical outlet is well grounded in advance.
3.4 Power on
The SMCFS1601/SMCFS2401 16/24-port 10/100Mbps Fast Ethernet Switch is
powered by an AC Power Supply. Connect the Switch and power outlet by power
cord. Powering on the Switch, it will be automatically initialized and the LED
indicators should respond as follows:
1) All of the LED indicators will flash momentarily for one second, which
represents a resetting of the system.
2) The Power LED indicator will light up.
SMCFS1601_2401_UG_20101102_v1 1.pdf 11 2010-11-30 17:52:36
To Next Page
Loading...
Need help?
General
