SMC Networks ISE20B User Manual

-60-
No.PS※※-OMV0006-D
<Operation – With security code input ->
•Locking
(1) Press the
button for 5 seconds or longer in measurement mode. When [oPE] is displayed on the
main display, release the button.
The current setting [LoC] or [UnL] will be displayed on the sub display.
(2) Select the key [LoC] with
or button, and press the button to set.
•Unlocking
(1) Press the
button for 5 seconds or longer in measurement mode. When [oPE] is displayed on the
main display, release the button.
The current setting [LoC] or [UnL] will be displayed on the sub display.
(2) Select the un-locking [UnL] with
or button. Setting is recognized by pressing the
button, then security code is required.
(3) For instructions on how to enter the security code, refer to "How to input and change the security
code" on page 61.
(4) If inputted security code is correct, the indication of the main display changes to [UnL], and pressing
the one of
, or button releases key-lock and the measurement mode returns.
If the security code entered is incorrect, [FAL] will be displayed, and the security code must be entered
again. If the wrong security code is entered 3 times, [LoC] is displayed and the device returns to
measurement mode.

SMC Networks ISE20B Specifications

General

Brand	SMC Networks
Model	ISE20B
Category	Switch
Language	English