SMC Networks ISE35 User Manual

-20-
No.PS※※-OMJ0004-E
●Indication mode ( )
The display can be reversed.
This setting is necessary to change the indication mode on receipt of the Pressure switch.
<How to perform>
1. Keep pressing the button for 2 seconds or longer in the measurement mode.
After [ ] is indicated, press button eight times.
Then, [ ] and current setting appears in turn.
2. Press the or button to select the indication mode.
3. Keep pressing the button for 2 seconds or longer after selection is completed.
Then, the setting is finished, and the measurement mode returns.
If reverse indication is selected,
the button operation is changed
as shown on right figure.

SMC Networks ISE35 Specifications

General

Brand	SMC Networks
Model	ISE35
Category	Switch
Language	English