SMC Networks ISE35 User Manual

-12-
No.PS※※-OMJ0004-E
Setting of Function
■Default setting
As the time of shipment, the following settings are provided.
If the setting is acceptable, keep it for use.
If the different setting is necessary, change the setting with reference to each page.
Setting item
Page
Default setting
Switch output
Selects whether or not the Pressure switch output is made available.
If the switch output is unnecessary, it is available just like a pressure gauge.
page 14
ON
Indication color
Selects the color to indicate.
page 14
ON: Green
OFF: Red
Response time
Sets of a response time prevents chattering in output.
page 15
1 s
Operation mode
Selects the mode to operate the Pressure switch.
page 15
Hysteresis mode
Hysteresis
page 17
0.01 MPa (1 psi)
Output type
Sets the method to generate the switch output.
page 17
Normally open
Power saving mode
Selects the power saving mode.
page 18
OFF
Secret code input
Selects the necessity of secret code input for key lock.
page 18
OFF
The value in ( ) is for the indication unit "P".
○Setting of special function
Setting item
Page
Indication mode
Reverse the indication mode.
page 20
Indication unit (available with unit conversion function)
page 21
○NOTE
When the default setting is changed, since the different setting item appears in order depending on how
many times the button is pressed, confirm the item which needs to be set appears correctly and
prevent undesired setting.

SMC Networks ISE35 Specifications

General

Brand	SMC Networks
Model	ISE35
Category	Switch
Language	English