To Next Page

To Previous Page

-24-

No.PS※※-OMJ0004-E

●How to change the secret code

At the time of shipment, the secret code is set to [000], but can be changed to optional one.

1. After the lock setting is finished (page 23), perform all three steps in the unlock setting procedure.

(page 23, "3")

2. After the secret code is inputted and the indication changes to [ ], keep pressing the

and

buttons simultaneously for 5 seconds or more. [000] is indicated and the change of secret code is

asked.

For how to input the secret code, refer to "How to input and change the secret code".

Changed secret code is indicated.

3. After check it is as desired, press the

button.

The measurement mode returns. At this time, if the

button is pressed, changed secret code

is not entered and the change of secret code is asked.

●How to input and change the secret code

The first digit starts flashing.

Press the or button to set the value.

Pressing the button starts flashing the second digit.

(If the button is pressed at the uppermost digit,

the first digit starts flashing again.)

After the setting is finished, keep pressing the button

for 1 second or longer.

If the operation is not performed for 30 seconds during input and

change of the secret code, the measurement mode returns.

SMC Networks ISE35 User Manual

Questions and Answers: