SMC Networks VQC1000 Series User Manual

Features 1
Series VQC1000/2000/4000
(Based on IEC529)
Connector
Type
(Series)
VQC1000
VQC2000
VQC4000
Manifold
pitch (mm)
10.5
16
25
Flow characteristics
Note)
Metal seal
Applicable
cylinder
size (mm)
to ø50
to ø80
to ø140
Compact and high flow
Connector entry direction
can be changed with a
single push
The connector entry direction can be changed from the
top to the side by simply pressing the manual release
button.
It is not necessary to use the manual release button when
switching from the side to the top.
Top entry
Side entry
Conforming to IP67 for
protection from dust
and moisture
M12/M8
connector selection available
For I/O SI unit
(DeviceNet compatible)
Input blocks
Serial transmission
EX250
Note) Values for 2-position single from the cylinder port to the exhaust. (From 2 to 3 and from 4 to 5)
Series
EX500
Connector Type Manifold
(For kits S and T)
Outstanding response times
and long life
(Metal seal: Single type with light and surge suppressor)
VQC1100: 10ms ±2ms; 200 million cycles
VQC2100: 20ms ±2ms; 200 million cycles
VQC4100: 17ms ±3ms; 100 million cycles
Accommodates gateway
type serial wiring
• Gateway unit types are DeviceNet, PROFIBUS-DP and
Remote I/O.
• Because just one gateway unit controls up to 4 branch
lines, it offers much more freedom in choosing valve
mounting locations than do conventional serial units.
• Manifolds and input blocks can be mounted in close
proximity of actuators, thus effectively shortening air
piping and electrical wiring lengths.
• Since wiring is “prepackaged” into one multi-connector
type cable, wiring work is not only made easier, but
much more accurate.
• A single cable from the gateway provides both signal
and power to each branch, thus eliminating the need for
separate power connections for each manifold valve and
input block.
• The use of a multi-connector for input blocks makes
manifold station expansion or reduction a breeze.
NEW CONCEPT
Rubber seal
C[dm
3
/(s
•
bar)]
0.72
2.6
6.9
b
0.25
0.15
0.17
Cv
0.18
0.60
1.7
C[dm
3
/(s
•
bar)]
1.0
3.2
7.3
b
0.30
0.30
0.38
Cv
0.25
0.80
2.0

SMC Networks VQC1000 Series Specifications

General

Brand	SMC Networks
Model	VQC1000 Series
Category	Control Unit
Language	English