Smeg DCF01 User Manual

Use
32
Rinsing of the internal circuits
Rinse the internal circuits after filling the tank:
1. Place the jug (6) on the Keep Warm
plate (7) WITHOUT putting ground
coffee into the filter.
2. Press the ON/OFF button.
3. Wait for the cycle to finish and empty the
jug.
4. Repeat the cycle: the machine is now
ready for use.
3.3 How to prepare the coffee
1. Fill the water tank as indicated in section
”3.1 Before first use”.
2. Lift the lid of the water tank (1) and insert
the permanent filter (2) into the filter
holder (3).
3. Fill with the amount of coffee required,
according to the number of cups to be
prepared, using the scoop (4) provided.
The permanent filter allows you to
prepare drip coffee without using
paper filters. However, according
to your own preference, a paper
filter #4 can be used instead.
Place the paper filter inside the
filter holder and add the desired
amount of coffee.

Smeg DCF01 Specifications

General

Jug capacity	1.25 L
Product type	Espresso machine
Capacity in cups	10 cups
Coffee input type	-
Coffee maker type	Semi-auto
Appliance placement	Countertop
Water tank capacity	1.4 L
Keep warm function time	20 min
Adjustable coffee strength	Yes
Reservoir for brewed coffee	Jug
Number of coffee strength settings	2
Cord length	1 m
Control type	Buttons, Lever
Product color	White
Housing material	Plastic, Stainless steel
Ristretto making	No
AC input voltage	220 - 240 V
AC input frequency	50 - 60 Hz

Weight and Dimensions

Depth	256 mm
Width	245 mm
Height	361 mm
Weight	3400 g