Snapper R8000 User Manual

Operator’s Manual & Safety Instruction for
MODEL R8000
REAR TINE TILLERS
Thank you for buying a SNAPPER product! Your
Tiller was designed and built to provide long and
satisfactory service. Study this manual carefully
before operating the Tiller and pay particular atten¬
tion to the Important Safety Instructions below.
Keep in mind that a Tiller, like any other mechanical
device, can be potentially dangerous if used im¬
prudently. Following the instructions in this and the
engine manual will help you continue to enjoy the
trouble-free operation expected of a SNAPPER.
IMPORTANT SAFETY INSTRUCTIONS
Warning: This tilling machine is capable of causing personal injury! Failure to observe the following
instructions could result in serious injury to the operator or persons in the operational area. Careful¬
ly read these instructions and be sure to question your Snapper Dealer if in doubt about anything.
Should the Dealer not answer to your satisfaction, write or call the Snapper Customer Service
Department at McDonough, Ga., 30253 (Phone 404-957-9141).
1 .
2 .
3.
4.
5.
6 .
7.
8 .
9.
10 ,
11
12
Become thoroughly familiar with all controls and learn how to stop tine rotation quickly in
preparation for emergencies.
Never allow children or immature, uncoordinated or inexperienced persons to operate
your tiller.
Keep everyone safely away from the area being tilled.
Be especially watchful for children and pets darting into the area while operating.
Wear protective clothing and appropriate shoes to provide best footing on uneven terrain.
Persons under the influence of alcohol or drugs must not be allowed to operate your
tiller.
Stay alert, give complete and undivided attention to the job on hand.
Fill fuel tank only when engine is stopped and not hot. Fill outside where fumes can be
safely dissipated.
Make sure clutch is disengaged before attempting to start.
Keep feet, hands and clothing safely away from tines at all times.
Disengage the tines and stop the engine before making any adjustments, attempting to
clean or clear tines, or leaving the operator’s position even momentarily!
1-4493(8/82)
Remember to avoid operating the engine in any enclosed area where deadly exhaust
fumes could accumulate.
(over)

Snapper R8000 Specifications

General

Brand	Snapper
Model	R8000
Category	Tiller
Language	English

Summary

Important Safety Instructions

Key Safety Precautions

Essential safety guidelines to prevent injury during tiller operation, including familiarization with controls and keeping bystanders clear.

Operating the Rear Tine Tiller

Pre-Start Checklist

Essential checks before starting the tiller to ensure proper function and safety, including oil, air cleaner, and guards.

Starting and Stopping Procedures

Step-by-step instructions for safely starting and stopping the tiller's engine and tines, including emergency measures.

Handlebar, Transport, and Tilling Operations

Handle Bar and Transport Adjustments

Instructions for adjusting the handle bar and preparing the tiller for transport to the work site to avoid damage.

Tilling Procedure and Hints

Guide for tilling operations, skid arm settings, speed selection, and hints for rough terrain.

Tine Rotation and Service Assistance

Tine Rotation Selection

Explanation of how to change tine rotation direction (reverse/forward) for different tilling tasks and depth.

Service Parts & Assistance

Information on obtaining genuine Snapper replacement parts and contacting dealers for service and support.

Tiller Maintenance and Storage

Standing Tiller on End

Procedures and precautions for safely standing the tiller on its end for maintenance access.

Tiller Tines and Lubrication

Details on tine maintenance, sharpening, and lubrication of chain/gear cases and moving parts.

Belt Adjustment & Replacement

Instructions for adjusting belt tension and replacing the drive belt for proper tiller function.

Clutch and Drive Disc Service

Clutch Adjustment and Testing

Procedures for adjusting clutch springs and testing engagement for correct operation.

Driven Disc Service

Guidance on checking, adjusting, and replacing the rubber driven disc for traction issues.

Off-Season Storage Procedures

Preparing for Storage

Steps for cleaning and preparing the tiller for storage during the off-season to maintain its condition.

Tractor Conversion and Warranty

Tractor Conversion & Accessories

Information on converting the tiller to a tractor and available garden tool accessories.

Manufacturer's Limited Warranty

Details of the manufacturer's limited warranty policy, including coverage and exclusions.