Snapper XD Series User Manual

17
OPERATION
OPERATING THE CHAIN BRAKE
Check the operating condition of the chain brake prior to each use.
• Engage the chain brake by rotating your left wrist towards the guard, allowing the back of your
hand to engage the brake while the chain is rotating. Be sure to maintain both hands on the
saw handles at all times.
WARNING
If the chain brake does not stop the chain immediately, or if the chain brake will not stay in the run
position without assistance, take the saw to an authorized service center for repair prior to use.
BRAKE OFF BRAKE ON
Not for Reproduction

Snapper XD Series Specifications

General

Brand	Snapper
Model	XD Series
Category	Chainsaw
Language	English